What to do if Irrigation Well Pump Not Working
Irrigation well pump failure can mean disaster for a farm or ranch. A reliable water source is essential for crops and livestock, and when the irrigation well pump fails, they quickly die of thirst. Learn more about the importance of irrigation well pumps and what you can do when irrigation well pump not working.
There are a number of reasons why an irrigation well pump might fail. The most common cause is a power outage. Without electricity, the pump cannot operate and water cannot be pumped from the well. Another common cause of irrigation well pump failure is a clogged filter. If the filter becomes clogged, it can restrict the flow of water and cause the pump to overheat and shut down.
When an irrigation well pump fails, it is important to take immediate action to prevent further damage. If possible, turn off the power to the pump and allow it to cool down. Once the pump has cooled, check the filter and clean or replace it if necessary. If the problem persists, contact a qualified technician for assistance. With proper care and maintenance, an irrigation well pump should provide years of reliable service.
An irrigation well pump can provide years of reliable service with proper care and maintenance. There are a number of things you can do to prevent irrigation well pump failure, including:
- Checking the power supply to make sure it is adequate and properly plugged in.
- Inspecting the filter regularly and cleaning or replacing it as needed.
- Keeping the area around the pump clear and free of debris.
- Checking the pump for signs of overheating and cooling it down if necessary.
- Contacting a qualified technician if the pump fails to restart after cooling down.
If you take these simple steps, you can help prevent irrigation well pump failure and keep your farm or ranch running smoothly.
If you’re noticing any of the following signs, it might be time to call in a professional:
- Low water pressure
- Pump runs constantly or cycles on and off frequently
- Pump is noisy or makes strange noises
- Water is cloudy or has a bad odor
- Water is leaking from the pump or discharge pipe
- Pump is over-heating or has trouble starting
- Ground around the well is wet or muddy
- There is a decrease in water flow from the well
- Electrical wiring to the pump is corroded or wet
- The pump control panel is not working properly
- The well itself appears to be dry or has very little water in it.
If your irrigation well pump not working, there are a few things you can do to try and fix the problem. If the pump is still plugged in and has power, try turning it off and on again. If that doesn’t work, check the fuse box or circuit breaker to make sure there is power going to the pump. If there is power and the pump still isn’t working, it might be time to call a professional irrigation company.
If you’re experiencing any of these problems, don’t hesitate to call a professional. They can help you diagnose the problem and get your irrigation well pump back up and running.
1046 Axlewood Cir, Brandon, FL 33511