Irrigation System Repair
If you’re struggling to keep your yard watered, you’ll probably need irrigation system repair. You can’t turn off the water when you don’t want to, and having a broken valve, solenoid, or filter will ruin your yard’s appearance. A faulty irrigation system will prevent the controller from talking to the valves, so it’s best to have a professional inspect it. Damaged valves and solenoids can lead to costly repairs, and they’re best handled by an irrigation specialist. Click for additional info.
Cost of a faulty valve
If your irrigation system is malfunctioning, one of the easiest and cheapest repairs you can do is to replace the faulty valve. The cost of replacement depends on the size and scope of the damage. You can either replace a single part, such as the valve, or replace the entire valve. In some cases, a simple valve repair is sufficient, but other repairs may require zone splitting or a complete redesign of the irrigation system.
The first step in repairing a valve is to turn the irrigation system off and check the sprinkler heads to make sure that water is getting to the sprinklers. The problem may be in the solenoid valve, a coil of wire that signals the valves to shut off or allow water to enter the system. Replacing a solenoid valve is relatively simple and cost-effective. All you need is a socket and a wrench.
Once you determine the cause of your problem, you’ll know what parts you need and how much to budget. For example, a $30 sprinkler valve replacement will cost between $50 and $85; a $150 replacement may cost around four times as much. However, it’s worth comparing the prices of replacement parts for a particular irrigation valve. If you’ve changed the landscape or your sprinkler system is a complex system, it may be worth the money to hire a professional irrigation repair service.
Cost of a faulty solenoid
One of the most frustrating aspects of an irrigation system is a faulty solenoid. This component is responsible for controlling the flow of water in the sprinkler system. Sprinkler timers send an electrical signal to the solenoid, which controls the amount of water applied to your lawn. It can be expensive to repair, but it’s also easily replaceable. It’s important to remember that all valves are connected by a common wire, which can be accidentally cut.
In many irrigation systems, a faulty solenoid can cost a few hundred dollars. This part controls the water pressure in the irrigation system and is the source of weird sprinkler system problems. Sometimes, the solenoid can’t close the valve properly, or the plunger can become clogged with debris, causing the sprinkler system to shut off or run too much water.
Depending on the type of valve, some can be replaced without replacing the entire valve. To change a camshaft solenoid valve, you’ll need to remove the control cover and unplug the wiring harness. Another type of solenoid is hydraulic. It works with an electromagnet and controls the flow of water in an underground sprinkler system. It contains different chambers and openings, and is usually easier to replace.
Cost of a faulty filter
Replacing a faulty filter in an irrigation system can cost anywhere from $125 to $375, depending on how large the filter is. It’s best to hire a professional for this job, as the labor costs will be considerably higher than replacing the whole system. Nevertheless, if the problem is only noticeable, replacing the filter can save you money in the long run. In this article, we’ll outline the main steps to take when repairing a faulty filter.
The cost of an irrigation system repair depends on the type of filter and the brand name of the equipment. The manufacturer’s warranty period will usually cover faulty parts or components for up to five years. In addition, faulty filters caused by yard work or natural disasters will likely not be covered by warranty. Before deciding on the repair price, it’s important to determine if the problem can be solved by repairing the system yourself.
Poor water quality can cause valves to malfunction. If sediment builds up around the valve seats, the valve won’t open or close properly. It can also damage pump internals, causing the pump to work harder and reduce irrigation efficiency. Less water flowing through the system means a smaller water savings. Ultimately, a faulty filter can cost you $5 to $10k. A spin-down filter from Vu-Flow is a low-cost option for years of reliable irrigation system operation. Click here for the next article.